Products
Displaying 1 through 25 of 46 products found.
Show All
Sort by:
Relevance,
Product Name,
Product Type
Single Switch Scanner
Other AT
By Adaptive Switch Laboratories, Inc.
Description:
The ASL 101 has a display module that illuminates 5 LED's for forward, right, left, reverse and select. The scan rate is adjustable and is best used for someone that only has one switch site available and other means for driving have been ruled out as an option.
[View Full Details]
Electronic Head Array
Other AT
By Adaptive Switch Laboratories, Inc.
Description:
The ASL 105 system utilizes three nonadjustable proximity sensors placed inside a headrest for control of a power wheelchair. This alternative driver control system is highly successful for individuals with Cerebral Palsy or anyone without fine motor control/coordination due to the no pressure feature of the proximity switch.
[View Full Details]
4 Switch Proximity Tray Array
Other AT
By Adaptive Switch Laboratories, Inc.
Description:
The ASL 106 offers four proximity sensors that allow the driver to operate a power wheelchair. These sensors can be positioned inside a tray or at any available switch site. It was designed for those who have problems maintaining a switch that requires pressure or contact.
[View Full Details]
Switch Fiber Optic Arrays
Other AT
By Adaptive Switch Laboratories, Inc.
Description:
The ASL 107, 108 are two or four fiber optic switches that allow the driver to operate a power wheelchair. These sensors can be positioned inside a tray or at any available switch site. Typical users are individuals with extremely limited movement such as MD, MS, ALS and SMA.
[View Full Details]
Sip and Puff Head Array
Other AT
By Adaptive Switch Laboratories, Inc.
Description:
The ASL 109 combines simple sip and puff controls with head movements. This system is designed for those with lateral head movement and weak breath control volume. The driver control is typically used with individuals with high level spinal cord injury.
[View Full Details]
Micro Extremity Control (MEC)
Other AT
By Adaptive Switch Laboratories, Inc.
Description:
The ASL 130 is a fully proportional joystick with the unique feature of having a built in mode change function. The MEC only requires 18 grams of force to deflect the joystick. It is designed for those who have very limited hand or chin movement.
[View Full Details]
Proportional Mini Joystick (PMJ)
Other AT
By Adaptive Switch Laboratories, Inc.
Description:
The ASL 131 is small and can be manipulated with less than 10 grams of force. The short through of this joystick requires minimal movement to activate and works well for clients that have very minimal movement and force such as clients with SMA, ALS, or MD.
[View Full Details]
Pediatric Compact Joystick
Other AT
By Adaptive Switch Laboratories, Inc.
Description:
The ASL 132 is a fully proportional joystick. The small size and joystick cap make it easy for the user to operate and manage, since it is only two inches tall from the bottom to the joystick base. It is ideal to mount mid-line or on any pediatric wheelchair.
[View Full Details]
Compact Joystick - Single/Dual Switch
Other AT
By Adaptive Switch Laboratories, Inc.
Description:
The ASL 133 and 134 are fully proportional with a unique shape and size which makes it easier to grab and manipulate. It has a textured end for a tactile feel making it easier to hold and a reset switch in the top of the joystick cap.
[View Full Details]
Mushroom Joystick
Other AT
By Adaptive Switch Laboratories, Inc.
Description:
The ASL 135 was designed to fit the contour of a hand, so no gripping or pincer grasp is needed. Deflection of the joystick uses minimal force and the flat plate made from a slick material surrounds the cap and provides a place for the hand and wrist to rest.
[View Full Details]
Fiber Optic Switch
Hardware
By Adaptive Switch Laboratories, Inc.
Description:
The ASL 202 is a single function switch with a round target area 3/16 inch in diameter. It has an adjustable activation range from 5/8 inch to 5.5 inches and can be built with a mono port and be either 12 or 24 volt.
[View Full Details]
Mini Fiber Optic Switch
Hardware
By Adaptive Switch Laboratories, Inc.
Description:
The ASL 203 is a single function switch with a round target area the size of a pencil lead in diameter. It has an adjustable activation range from touch to 1.5- inches and can be built with a mono port and be either 12 or 24 volt.
[View Full Details]
Non Adjustable Proximity Switch
Hardware
By Adaptive Switch Laboratories, Inc.
Description:
The ASL 204 is a single function switch with an activation range of touch to 1/4 inch. Activation occurs when it senses a hand or another part of the body in the activation area. It can be built with a mono port and be either 12 or 24 volt.
[View Full Details]
Adjustable Proximity Switch
Hardware
By Adaptive Switch Laboratories, Inc.
Description:
The ASL 208 is a single function switch has an adjustable activation range of touch to 1/2 inch. Activation occurs when it senses a hand or another part of the body in the activation area. It can be built with a mono port and be either 12 or 24 volt.
[View Full Details]
Photo Electric Switch
Hardware
By Adaptive Switch Laboratories, Inc.
Description:
The ASL 209 projects a cone shaped, invisible beam of light to an adjustable maximum distance of 21 inches. Switch activation occurs when any object passes through or is detected in the target area.
[View Full Details]
Adjustable Beam Switch
Hardware
By Adaptive Switch Laboratories, Inc.
Description:
The ASL 210 projects an invisible beam of light. A set screw on the barrel of the switch allows the activation range to be adjusted up to maximum distance of 15 inches. It is best used with the ASL 105 Electronic Head Array.
[View Full Details]
Egg Switch
Hardware
By Adaptive Switch Laboratories, Inc.
Description:
The ASL 300 is a mechanical switch and features a seal that prevents foreign substances from entering the switch and interfering with operation. The base features screw insets for secure mounting. It comes in five different colors: black, red, blue, yellow and green.
[View Full Details]
Lip Switch
Hardware
By Adaptive Switch Laboratories, Inc.
Description:
The ASL 301 allows a Sip and Puff user to access the control capabilities of the power wheelchair electronics by lip movement. The switch is mounted approximately a half inch from the end of the Sip and Puff straw. To change modes the user presses the switch with their lip.
[View Full Details]
Wobble Switches
Hardware
By Adaptive Switch Laboratories, Inc.
Description:
The ASL 304A is a single function switch that has a light action spring and can be activated by contact from any direction.
[View Full Details]
Button Switch
Hardware
By Adaptive Switch Laboratories, Inc.
Description:
The ASL 305 is a momentary switch that has an activation button the size of a dime and requires medium force for activation.
[View Full Details]
Pneumatic Switch
Hardware
By Adaptive Switch Laboratories, Inc.
Description:
The ASL 308 is a dual function switch that is also known as a Sip and Puff switch. A sip will activate one switch while a puff will activate the other switch.
[View Full Details]
Treadlite Switch
Hardware
By Adaptive Switch Laboratories, Inc.
Description:
The ASL 309 is a single function switch that is housed in metal. It is best suited as a foot switch.
[View Full Details]
Microlite Switch
Hardware
By Adaptive Switch Laboratories, Inc.
Description:
The ASL 312 is an extremely light touch mechanical switch. Activation occurs at one end with any downward light pressure movement.
[View Full Details]
Five Switch Adaptor Interface Box
Hardware
By Adaptive Switch Laboratories, Inc.
Description:
The ASL 502 allows the four directional commands and the select/reset command to be controlled by five momentary switches with 1/8 inch mono plugs. This adapter is compatible with all wheelchair electronics and/or other devices that allow for switch control. It provides a DB-9 digital connection for that control.
[View Full Details]
Remote Emergency Stop Switch
Hardware
By Adaptive Switch Laboratories, Inc.
Description:
The ASL 504 allows a power wheelchair to be stopped remotely within a range of 20 feet. It will stop the wheelchair with the activation of one switch and will allow it to move again when it is turned off. This switch is helpful when intervention is needed during training.
[View Full Details]
Search Tips:
There are a few special characters that you can use to provide more specific search criteria. Click on a character to learn how you can use it to enhance your searches.
Show All
Special Characters
+ (plus sign)
A leading plus sign indicates that this word must be present in each row that is returned.
Example: +apple +juice
Find records that contain both the words apple and juice.
- (minus sign)
A leading minus sign indicates that this word must not be present in any of the rows that are returned.
Note: The - operator acts only to exclude rows that are otherwise matched by other search terms. Thus, a boolean-mode search that contains only terms preceded by - returns an empty result. It does not return "all rows except those containing any of the excluded terms."
Example: +apple -juice
Find records that contain the word apple but not the word juice.
* (asterisk)
The asterisk serves as the truncation (or wildcard) operator. Unlike the other operators, it should be appended to the word to be affected. Words match if they begin with the word preceding the * operator.
Example: apple*
Find rows that contain words such as "apple", "apples", "applesauce", or "applet".
() (parentheses)
Parentheses group words into subexpressions. Parenthesized groups can be nested.
Example: +apple -(sauce dumpling)
Find rows that contain the word "apple", but not the words "sauce" or "dumpling".
"" (double quotes)
A phrase that is enclosed within double quote (") characters matches only rows that contain the phrase literally, as it was typed. When words are NOT in quotes, each word is searched for independently.
Example: "apple pie"
Find rows that contain the phrase "apple pie".
