KM-203 KUPOCARE Wheelchair Camera Mount (S size Super Knuckle Arm)

Other Assistive Technology

In this set, the S size (3″) Super Knuckle Arm has a ball head with 1/4″-20 male thread on one end that is compatible with most cameras & camcorders. The two 1″ aluminum ball head joints of the Super Knuckle Arm allows users to freely adjust the angle of cameras and lock the position by simply tightening the central knob. The Wheelchair Tube Clamp is equipped with a ball head that directly mounts into the Super Knuckle Arm. The Clamp can be tightly mounted onto wheelchair frame tubes and provides a very stable base. Given that there is no universal diameter for wheelchair tubes, three plastic spacers and a rubber strip are included allowing the clamp to fit 3/4″ (19 mm), 7/8″ (22.2 mm), 1″ (25.4 mm), 1-1/8″ (28.6 mm), 1-1/4″ (32 mm) tubes. It is recommended to leave the tube clamp installed on the wheelchair so that it does not need to be remounted. The Super Knuckle Arm is easily released from the Wheelchair Tube Clamp by loosening the central knob of the arm. This set mounts a camera or camcorder within a flexible 3″ (7.6 cm) radius of a wheelchair tube.