KM-204 KUPOCARE Wheelchair AAC Switch Mount (S size Super Knuckle Arm)

Other Assistive Technology

This S size (3″) Super Knuckle Arm has a ball head with 1/4″-20 female thread on one end that matches the universal mounting system of AbleNet switches. The two 1″ aluminum ball head joints of the Super Knuckle Arm allows users to freely adjust the angle of mounted AAC switches and lock the position by simply tightening the central knob. The Wheelchair Tube Clamp is equipped with a ball head that directly mounts into the Super Knuckle Arm. The Clamp can be tightly mounted onto wheelchair frame tubes and provides a very stable base. Given that there is no universal diameter for wheelchair tubes, three plastic spacers and a rubber strip are included allowing the clamp to fit 3/4″ (19 mm), 7/8″ (22.2 mm), 1″ (25.4 mm), 1-1/8″ (28.6 mm), 1-1/4″ (32 mm) tubes. It is recommended to leave the tube clamp installed on the wheelchair so that it does not need to be remounted. The Super Knuckle Arm is easily released from the Wheelchair Tube Clamp by loosening the central knob of the arm. This set mounts an AbleNet switch or any equipment with 1/4″-20 male thread within a flexible 3″ (7.6 cm) radius of a wheelchair tube.