KM-215 KUPOCARE Wheelchair GoPro Holder (S size Super Knuckle Arm)

Other Assistive Technology

The GoPro holder can directly attach to the underside of the action camera to replace the factory mounting bracket and connects to the Wheelchair Tube Clamp base through the S size (3″) Super Knuckle Arm. The ball head on either end of the arm allows users to freely adjust the GoPro’s angle and can be locked into position by tightening the central knob. The Wheelchair Tube Clamp is equipped with a ball head that directly mounts into the Super Knuckle Arm. The Clamp can be tightly mounted onto wheelchair frame tubes and provides a very stable base. Given that there is no universal diameter for wheelchair tubes, three plastic spacers and a rubber strip are included allowing the clamp to fit 3/4″ (19 mm), 7/8″ (22.2 mm), 1″ (25.4 mm), 1-1/8″ (28.6 mm), 1-1/4″ (32 mm) tubes. It is recommended to leave the tube clamp installed on the wheelchair so that it does not need to be remounted. The Super Knuckle Arm is easily released from the Wheelchair Tube Clamp by loosening the central knob of the arm. This set mounts a GoPro action camera anywhere within a flexible 3″ (7.6 cm) radius of a wheelchair tube.