Keyguards For Keyboards, Laptops, and iPads


Lasered Pics offers the greatest number of materials for keyguards of any manufacturer.  In this blog they’ll help you understand the differences so you can choose the material that will best work for your keyguard users.

Lasered Pics can make a keyguard in any configuration to match any app.  They make our keyguards to match the settings you have chosen in the app, rather than requiring you to set the app to match our keyguard.  Combined with your choice of materials, these options make our made-to-order keyguards truly customizable to a degree our competitors can’t match.

  • Keyguards for Keyboards
  • Keyguards for Laptops
  • Keyguards for iPads
  • Keguards Options/Supplies/Miscellaneous

Since every Lasered Pics keyguard can be custom fit to the user’s case, they have experience with more different cases than just about anyone, and people are always asking us “Which case should I buy?”. Well, they certainly have opinions on the good and the bad of many, many cases. However, they’re not qualified to tell you what’s going to work for your end user’s situation, but they do have some opinions on general usage, and they have strong opinions on what cases work best for designing keyguards.

So with that in mind they’re going to tell you a little bit of what they’ve learned about cases in general, some of the cool ways we have of attaching keyguards to iPad cases, and then the details of some of the most often used cases and how they facilitate keyguards.

Two Types of Case

They place cases in two general categories which they call foam cases and rigid cases. They  don’t have a favorite type. They think you need to determine which type of case is best for your end users. Here’s a little bit about the differences, advantages and shortcomings.

Foam Cases

Foam cases are the elastic ones with no hard shell, regardless of whether they’re made out of actual foam. Some are firm and others are spongy, but they all protect the iPad by absorbing shock with their padding, like the airbags in your car. They generally fit all around and behind the iPad and are attached by being stretched around the edges of the iPad. They usually have openings for cameras, volume buttons, etc., and are generally cut to expose the home button. Foam cases are generally the least expensive, and are sometimes not very well made, though even the saddest looking ones still provide good protection.

The stiffest foam cases require enough force to insert the iPad that you are sure you’re going to crack the screen. It helps to insert the stiffest end first, then stretch the stretchiest end last.

Foam cases don’t generally come with a screen protector, so it is usually advisable to add a “glass” screen protector before mounting the case. Some come with handles or straps, and on some of them you can drill through the handle to attach straps of your own design. Often they have a folding stand which does a fair job of propping up the iPad a ittle, and a poor job of standing it near upright.

Foam cases in general provide plenty of room for us to make strong keyguards. They like ‘em, so don’t hesitate to choose one if you will be adding a keyguard.

Rigid Cases

The next type of case is a rigid case consisting of two or more pieces that form a clamshell around the iPad. They often come with a plastic screen protector which isn’t of high quality and often responds poorly to the user’s touch. These cases are often advertised as water-resistant or even waterproof! While they are certainly great protection against saliva and accidental or intentional submersion in the bathtub, I can’t see ever intentionally submerging my iPad! Some come with a plastic jig you can insert in place of your iPad to prove to yourself that it’s actually waterproof. Still…

If you don’t need the case to be actually waterproof, you can usually remove the cheap screen protector and add a nice “glass” one. The provided screen protector is usually held with a light glue or double-sided tape and can be easily removed.

To insert an iPad into a rigid case, you need to open it. If the case is surrounded by an elastic skin, remove it by peeling it off. It’s hard to get a grip on it sometimes, so look for elastic plugs around the power jack or elsewhere that provide a good place to start. With the skin removed, you’ll see what you need to do next.

If there are screws on the back, loosen them until you can separate the two parts of the case. If there are no screws, you usually have to pry apart the plastic clamshell. Look for places you can insert a dime or a flat screwdriver and give it a careful twist. There might also be small tabs which need to be pried back to release them.

Fit the iPad to the open shell, being carefull to orient it in the right direction so the buttons and cameras line up with the case openings. Align the two parts of the clamshell carefully, then snap or screw them back together. Re-wrap it in the skin if you removed it.

Rigid cases protect by transfering the shock through the hard shell like the structure in your car protects you. They sometimes have handles or straps, and may contain stands that we find vary from excellent to totally useless. Many rigid cases give us adequate room for a keyguard, though some give us so little room that they just can’t make a keyguard as strong as we would like.

Keyguard Attachment

The way you attach a keyguard to an iPad depends entirely on the case. The critical issues are the thickness of the bezel surrounding the screen opening, and the amount of open space around the visible portion of the screen (the part with the viewable pixels). While there are commonalities among foam cases and among rigid cases, the differences are much greater in the cases from one manufacturer or another, or even among different designs from the same manufacturer.

Lets look briefly at the different types of mounting Lasered Pics offers, depending on the case. For details about specific cases, see Part Two.

Suction Cups

One of the earliest attachment keyguard methods was suction cups. A keyhole is drilled in each corner of the keyguard. The ball of the cup is inserted in the big opening and then slid into the smaller, locking it into place. Then the cups are pressed onto the screen to attach the keyguard.

Suction cups hold tight for a long time, but they can be difficult to move if you don’t get them lined up, so always turn on the iPad and open the app before mounting them so you can be sure the keyguard is lined up. The flattened cups take up a lot of room, so they can’t be used at all on a case that has a small screen opening, and on the cases that provide minimum room, the suction cups may obscure a small portion of the screen. Fortunately, they’re clear.

On foam cases, to get enough room for suction cups we sometimes have to place them so they will extend slightly under the edge of the foam. After placing the suction cups peel back the foam a little and wiggle the keyguard so the cups spread out a little under the case, which will then help to hold the cups tight.

Suction Cup Tape

When the case provides enough of an opening, They can use suction cup tape, a black rubber tape with a strong adhesive on the back to stick on the keyguard and thousands of microscopic suction cups on the front. You can’t even see them without magnification! And the stuff works great. If you never pull it off, it sticks indefinitely, but you can remove and reattach it over and over without loas of suction.

The tape will lose its grip as it gets dirty, but it’s washable with a mild detergent like soft soap or dish soap. Just be sure you rinse it well under warm water. It takes forever to evaporate dry, so you can help it along by squeezing it hard against the glass. Every time you do that you’ll see a little amount of moisture on the screen where the tape was attached, until eventually you get it dry and it sticks like new.

Like suction cups, suction cup tape takes up room, so is unusuable on cases with small screen openings. Though it takes up less room than suction cups, it needs flat areas on the keyguard where it can be attached. It works well with more than half the cases we’ve tried.


Straps work with every kind of case except a few of the foam cases where the thickness of the foam holds the straps too high off the screen. They attach to the right and left edges of the keyguard and stretch around the back of the case. They are a good choice if the keyguard needs to be removed and replaced often, though to swap out several different keyguards, you’re going to want a set of straps for each keyguard, since it would take too long to move the straps from one to the other.

The standard strap mounts hold the keyguard off the screen 1/8”, perfect for heavy droolers. We can also flush-mount straps so they site on or slightly above the screen.

The feedback we get is that people don’t like to use straps in a couple circumstances. First, if you use the iPad flat on a table, it can rock on the strap buckles a little. Second, if a user is prone to distraction, the straps and their attachments can provide tempting targets for fidgeters to grab.

Snap-In Attachment

Their most popular attachment, and the least expensive, is the snap-in attachment. A small flange, or ledge, is cut into the edges of the keyguard which slips under the edge of the case, holding the keyguard securely against the screen. It’s a semi-permanent installation, so it’s best for users who use a single app and don’t need to change it often. On riged cases that are secured with screws, it actually becomes a permanent installation and can only be removed by loosening the screws. Kind of yucky for a heavy drooler.

The snap-in tabs require that the seal on a case’s screen protector be broken to insert it. That means the case can no longer be waterproof. It’s easy enough to do, though.

This is also a great attachment for an easily distracted user, because there are no visible attachments with which to fiddle. The snap-in attachment works with almost every case we’ve ever tried, the exceptions being cases with too small a rim surrounding the iPad, or too-flexible material surrounding the screen.

Velcro Attachment

The Velcro attachment is an extra acrylic flange that is bonded to the top of the keyguard and extends over the bezel of the case. It provides a flat area for mounting with Velcro, though you could replace the Velcro with putty or mounting tape. It only works on a limited number of cases that have a wide bezel surrounding the screen. If the bezel is perfectly smooth and flat, it can even be mounted with suction cup tape. Don’t try suction cup tape on a textured or angled bezel. It won’ t work.

Though it only works on certain cases, the Velcro attachment is a great attachment if you need to remove and reattach the keyguard often. It’s great for users of multiple apps. Unless we make the keyguard with a thicker plastic, the Velcro attachment does hold the keyguard a bit off the screen.

Magnetic Attachment

The Magnetic attachment uses the same extra flange that extends over the bezel of the case.  However, instead of Velcro or tape, strong magnets are embedded in the flange.  It only works on a limited number of cases that have a wide and flat bezel surrounding the screen, and like the Velcro attachment, it holds the keyguard up off the screen.

Though it only works on certain cases, the magnetic attachment is the absolute best attachment if you need to remove and reattach the keyguard often.  Unlike Velcro or tape, the magnets ensure that the keyguard snaps into the exact same position every time it is attached.  In fact, we reverse the polarity on two of the magnets so it’s impossible to attach upside down!  Great for blind users.


Polymethyl methacrylate (PMMA) is a common thermoplastic usually called acrylic, and often recognized by the brand names Plexiglass, Perspex, and Lucite.  It is most commonly transparent, though it is available in a variety of colors and opacities.  PMMA is more flexible than glass and tends to crack rather than shatter, making it much safer than glass.   It is laser cuttable, making it perfect for custom keyguards.  Though it can crack under extreme bending, it is plenty strong to withstand normal use and abuse.

Lasered Pics offers clear PMMA in thicknesses of 1/8″, 3/16″, and 1/4″.  We also offer a variety of colored acrylics in 1/8″ and 1/4″.  Colored acrylics help the user see the keyguard openings, however, they also obscure what’s on the screen.  Therefore, colored acrylics should not be selected for apps for sighted users when the software does not provide space between the cells. 

Examples of apps with good cell spacing where colored acrylics work well:  GoTalk Now, Compass, Proloquo2Go when cell spacing is Loose or Very Loose.  Examples of apps with poor spacing where colored acrylics should be avoided: TouchChat, LAMP Words for Life, Proloquo2Go when cell spacing is Normal, Compact, or Very Compact.

Lasered Pics offers semi-transparent acrylics like Smoke Black and Flamingo that allow for good differentiation of the cells while allowing the user to see everything on the screen.  Semi-transparent acrylics are a good compromise when there is no space between the cells.

Colored acrylics are a great choice for keyguards on keyboards and laptops, giving them a fun, personal touch.

Thicker acrylic is much more rigid than thinner acrylic, and less likely to break.  Also, thicker acrylic keeps the fingers farther from the screen and helps to prevent false touches.

All Lasered Pics acrylics are standard PMMA except for the 1/8″ clear acrylic, which is what’s called an impact-modified PMMA, sold under the name Resist 45.  It will handle very hard impacts without chipping or cracking, and its flexural strength is greater than standard PMMA, making it less breakable under bending.

1/8″ Resist 45 has been the default material for all Lasered Pics tablet keyguards for years due to its increased strength over standard PMMA.  

Acrylic keyguards are often made the same day they are ordered, and are usually shipped within a week when everything is in order.  The only exceptions are when we are waiting on the customer for complete information, when we have high demand for one of the less popular colors, or when we are out of the office for a trade show or conference.

PMMA/Acrylic Styrene (ADA-compliant)

This is a variety of acrylic that is great for making keyguards, and has been our preferred material since 2017.  It is more than 50% PMMA with a majority of the rest being acrylic styrene, a more flexible plastic.  This makes it much less prone to cracking when bent.  In fact, it is so flexible you need to just about fold it over to crack it. 

PMMA/acrylic styrene is designed for signage compliant with to the American Disabilities Act (ADA), which requires it to be non-glare.  As such, it is not quite as clear as standard PMMA.  The manufacturer rates it as 95% transparent.  The screen appears slightly darker through the acrylic, though it can still easily be read.  This has a distinct benefit, though, in that it helps to visibly separate the openings a little, unlike the more transparent keyguards which can blend in with the background.

Lasered Pics keyguards made from acrylic styrene come with a two-year guarantee against breakage.  They can be laser cut, so we have the greatest flexibility of design and the usual quick turnaround time.

Because of its high visibility, high transparency, high strength, and laserability, we expect ADA-compliant acrylic styrene to become a best-seller.


Polycarbonate is a thermoplastic polymer of carbonate groups that is extremely strong and durable.  It can be bent to extreme angles without breaking.  It is most commonly transparent, though many colors are available.  As such it is the premium material for Lasered Pics keyguards, and it comes with a lifetime guarantee against breakage.

Polycarbonate is the material of choice for keyguards with long, thin bars of plastic.  Lasered Pics polycarbonate keyguards have a lifetime guarantee against breakage!  Polycarbonate cannot be reliably laser cut, therefore it is milled, which allows us to bevel the edges of the cells, giving them a nice, soft feel, as opposed to the hard edges left by laser cutting.

When ordering keyguards, choose polycarbonate for apps with no space between the cells, or for cases which don’t allow enough room for thicker perimeter bars.  Check  here for information about the most popular cases and how much room they allow for strong keyguards.

Since polycarbonate keyguards are manufactured offsite, please allow an extra week for their manufacture.


Looking for a classy way to set your keyguard apart from the others?  Lasered PIcs makes keyguards out of real wood.  Since they are opaque, they are not suitable for apps without space between the cells.  However, they are great for apps with adequate room and give an executive look to keyguards on keyboards and laptops.

Wood keyguards make a wonderful conversation piece and a unique experience for the user.  Their old-world beauty is a remarkable contrast to the high-tech of the iPad!  Wood also provides a great tactile experience for low-vision users and users with high tactile needs.

Wood keyguards come unfinished.  They are laser cut, so there are no splinters, but light staining enhances their beauty.  We recommend a polyurethane finish.  Minwax Wipe-On Poly Clear Satin is an excellent choice!

Please allow an extra week for wood keyguards.

 Click here for more information.